How to cool a warm upper floor of a house

During the summer season, the upper-story rooms are likely to be much warmer than the main areas of the lake house if you live in a several-story house, changing the thermostat can cause an imbalance that results in the lower levels becoming too frigid and resulting in high weekly bills! A sizzling roof, sizzling air, or leaky ductwork can cause warm upper floors! The sizzling air rises, while the cool air settles at the bottom.

A home with many stories will have satisfactory cooling on the ground level, while heat will gather in the rooms up above.

The roof can absorb radiant heat from the sunshine and radiate that heat into the rooms closest to the attic… For the cool air to reach the upper floors of the house, it must travel through longer sections of ductwork. This can make cooling these rooms even more difficult if there are leaks in the ductwork. There is no need to update the entire AC unit in order to achieve a balanced cooling in your home! Instead, you just need to update the AC coil. There is nothing more you need to do however, adjust the dampers in each room by opening the basement and ground floor registers a bit less, and as you go up, opening them up a bit more, making sure the air filter is washed and replacing it if needed can also help ensure proper airflow. Radiant heat can be reduced by installing enough insulation on the roof. The roof deck or the roof floor can be installed with insulation, depending on the roofing style. Adding mechanical ventilation to the roof can boost attic insulation. Finally, if there are problems with the heating and A/C plan itself, such as low a/c output or leaks in the ductwork, you must have it fixed by a professional heating and A/C worker.

 

oil furnace